... I-Wholesale FCNS03 I-Fe Cu Ni Sn Pre Alloyed Powder Yomkhiqizi Nomthengisi we-Ceramic Diamond Blade |SinoDiam
  • ins
  • I-Linkedin In
  • i-twitter
  • youtube
  • ubuso
Sishayele: 0086-13937187660
English
sm_banner

imikhiqizo

FCNS03 Fe Cu Ni Sn Pre Alloyed Powder for Ceramic Diamond Blade

I-FCNS03 Fe Cu Ni Sn Pre Alloyed Powder yeCeramic Diamond Blade Isithombe Esifakiwe
  • FCNS03 Fe Cu Ni Sn Pre Alloyed Powder for Ceramic Diamond Blade

incazelo emfushane:

I-FCNS03 Fe Cu Ni Sn Pre Alloyed Powder Yecwecwe Ledayimane Lobumba 1. Iyini Impushana Eyakhiwe Ngaphambili Izimpushana ezihlanganiswe ngaphambilini ziqinile, azicindezeli kancane ngakho zidinga imithwalo yokucindezela ephezulu ukuze zikhiqize ukuminyana okuphezulu.Kodwa-ke, bayakwazi ukukhiqiza izinto ezisezingeni eliphakeme ze-sintered.I-pre-alloying iphinde isetshenziswe lapho ukukhiqizwa kwezinto ezilinganayo kusuka ku-elemental powders kudinga izinga lokushisa eliphezulu kakhulu kanye nezikhathi ezinde ze-sintering.Izibonelo ezinhle kakhulu yizinsimbi ezingagqwali, ezithi...


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

FCNS03 Fe Cu Ni Sn Pre Alloyed Powder for Ceramic Diamond Blade

1. Iyini I-Pre-alloyed Powder

Izimpushana ezifakwe ngaphambili ziqinile, azicindezeli kancane futhi yingakho zidinga imithwalo ephezulu yokucindezela ukuze zikhiqize ukuminyana okuphezulu.Kodwa-ke, bayakwazi ukukhiqiza izinto ezisezingeni eliphakeme ze-sintered.I-pre-alloying iphinde isetshenziswe lapho ukukhiqizwa kwezinto ezilinganayo kusuka ku-elemental powders kudinga izinga lokushisa eliphezulu kakhulu kanye nezikhathi ezinde ze-sintering.Izibonelo ezinhle kakhulu izinsimbi ezingenasici, okuqukethwe kwe-chromium ne-nickel kufanele kufakwe ngaphambili ukuze kuvunyelwe ukukhiqizwa komnotho nge-powder metallurgy.

2. Amapharamitha weI-FCNS03

Isici Esiyinhloko Fe, Cu, Ni, Sn
Ukuminyana kwethiyori 7.98g/cm³
I-Sintering Temperature 830℃
Ukugoba Amandla 1150Mpa
Ukuqina 104-108HRB

3. Uhlamvu lwe-FCNS03

  • Isakhiwo se-Sintered siyafana futhi sihlangene.isidumbu sinokulawula okuhle kwedayimane, ukumelana nokugqoka okukhulu nobukhali.
  • I-powder isetshenziswa ku-medium to high quality diamond blade, ama-ceramic cutting blade.

4. Imiyalo Yokwenza I-Ceramic Cutting Blade.

  1. Iphesenti lensimbi:
  • (30-50)% FCNS03
  • + (25-35)% Cu
  • + (5-8)% Sn
  • + (2-4)% Ni
  • + I-Fe ye-Blance

B. Usayizi Nephesenti le-Diamond Grit:

  • 50/60 @ 30%
  • 60/70 @ 40%
  • 70/80 @ 30%
  • Ukugxila: (9-12)%

C. I-Sintering Temperature: 840-860℃

  • Okwedlule:
  • Olandelayo:
    • Bhala umyalezo wakho lapha futhi usithumelele wona

    Umkhiqizoizigaba

    Chofoza u-enter ukuze useshe noma u-ESC ukuze uvale