FCNS06 Fe Cu Ni Sn Pre Alloyed Powder for Ceramic Squaring Wheel
FCNS06 Fe Cu Ni Sn Pre Alloyed Powder for Ceramic Squaring Wheel
1. Iyini I-Pre-alloyed Powder
Izimpushana ezifakwe ngaphambili ziqinile, azicindezeli kancane futhi yingakho zidinga imithwalo ephezulu yokucindezela ukuze zikhiqize ukuminyana okuphezulu.Kodwa-ke, bayakwazi ukukhiqiza izinto ezisezingeni eliphakeme ze-sintered.I-pre-alloying iphinde isetshenziswe lapho ukukhiqizwa kwezinto ezilinganayo kusuka ku-elemental powders kudinga izinga lokushisa eliphezulu kakhulu kanye nezikhathi ezinde ze-sintering.Izibonelo ezinhle kakhulu izinsimbi ezingenasici, okuqukethwe kwe-chromium ne-nickel kufanele kufakwe ngaphambili ukuze kuvunyelwe ukukhiqizwa komnotho nge-powder metallurgy.
2. Amapharamitha weI-FCNS06
 | Isici Esiyinhloko | Fe, Cu, Ni, Sn |
| Ukuminyana kwethiyori | 8.05g/cm³ | |
| I-Sintering Temperature | 810℃ | |
| Ukugoba Amandla | 1100Mpa | |
| Ukuqina | 105-110HRB |
3. Uhlamvu lwe-FCNS06
- Isakhiwo se-Sintered somkhiqizo siyafana, silungile futhi sihlangene, sinokumanzisa okuhle nokubamba impushana edayimane, ukuqina okuphezulu kwesidumbu, ukumelana okuhle kakhulu kokugqoka kanye nokusebenza okuhle okuphelele kwamathuluzi.
- Impushana isetshenziswa ensinini yesaha yedayimane esezingeni eliphezulu, izindwani zokusika ze-ceramic, isondo le-ceramic gridning squaring wheel kanye nama-scrapers.
4. Imiyalo Yokwenza Amasondo E-Ceramic Squaring.
- Iphesenti lensimbi:
- (40+60)% FCNS06
- + (15-25)% Cu
- + (6-10)% Sn
- + (2-5)% Ni
- + (8-12)% 663
- + I-Fe ye-Blance
B. Usayizi Nephesenti le-Diamond Grit:
- 70/80 @ 60%
- 80/100 @ 40%
- Ukugxila: (18-22)%
C. I-Sintering Temperature: 750-770℃
-
I-SND-M/PCD Professional Synthetic Micron Diamond...
-
B10 Black Cubic Boron Nitride Superabrasives CB...
-
I-FCNS77 Fe Cu Ni Sn Basic Pre Alloyed Powder ye...
-
I-Brilliant Cut Synthetic Diamond DEF VS2 1carat ...
-
I-Nickle Coated Synthetic Diamond powder
-
I-SND-M10 Synthetic Micron Diamond Powder Polish...
